How do you change the wire on a cheese slicer?



Can you replace the wire on a cheese slicer?

You can easily replace the wires on your own. In most cheese slicers available in the market, the cheese cutting board is normally made of marble and will have stainless steel wire attached to the cutting arm. The stainless steel wire usually lasts for many years and sometimes, comes with a lifetime warranty.

How do you reattach a wire to a cheese slicer?


Quote from video: Once you do that the wire has a little knot type of thing at the end. So kind of line that up get it into the hole. Once in there we rotate the bar back up it kind of locks it into place okay.

What kind of wire is used on a cheese cutter?





Cheese cutter W



The W cheese cutter is a worldwide unique product. The thickness of the wire on the cutter W (0.25, 0.30, 0.40, 0.45, 0.50, 0.60, 0.65 and 0.70 millimeters). The wire we produce for the cutter W is made of the highest quality, stainless steel wire, used in the food industry.

  Are cups of tea bad for you?

How do you clean a cheese slicer wire?

To clean, run a knife through cutting slot, wipe with a damp soapy cloth, then dry immediately. Occasionally rub a soft cloth moistened with mineral or vegetable oil. Hand wash recommended, not the safe in a dishwasher.

How do you replace the wire on a Kitchenaid cheese slicer?

Quote from video: To replace your wire. Start with the straight end of the replacement wire feed. It into the side of the wire cheese slicer and roll the tensioning wheel toward you until most of it is in loop.

What gauge wire is used for cheese slicer?

For my cutting wire I used 0.015″ music wire, this wire has a very high tensile strength and is thin enough to be wound easily. Wrap the end of the wire around one of the knurled screws and tighten, securing the wire to one side of the cheese cutter.



How do you change the wire on a soap cutter?



Quote from video: So once i get the new wire in here i'll be able to cut off the excess. And i won't have a big old swirly wire so this is all all right let me just pull it through the hole.

How do you use a cheese slicer?

Quote from video: Press down on the cheese slicer with even pressure press it down until it slices all the way through the cheese to the bottom.

Why do you cut cheese with a wire?

It ensures that a large portion of cheese can be cut into smaller, more manageable pieces. This can be greatly beneficial if you need to prepare even serving sizes. Also, using a cheese wire cutter will help to make a cleaner cut.

  Can you eat the fruit of the passion flower?

How do you sharpen a cheese slicer?

Quote from video: Open it up so it's all the way open. Then take your diamond flat file and match that bevel stroke into that cutting edge all the way across the cutting edge of the cheese slicer stroke into the edge.